NAME

mdconfig — create and control memory disks

SYNOPSIS

DESCRIPTION

The mdconfig utility creates and controls md(4) devices.

Options indicate an action to be performed:

-a

Attach a memory disk. This will configure and attach a memory disk with the parameters specified and attach it to the system. If the -u unit option is not provided, the newly created device name will be printed on stdout.

-d

Detach a memory disk from the system and release all resources.

-r

Resize a memory disk.

-t type

Select the type of the memory disk.

malloc

Storage for this type of memory disk is allocated with malloc(9). This limits the size to the malloc bucket limit in the kernel. If the -o reserve option is not set, creating and filling a large malloc-backed memory disk is a very easy way to panic the system.

vnode

A file specified with -f file becomes the backing store for this memory disk.

swap

Storage for this type of memory disk is allocated from buffer memory. Pages get pushed out to swap when the system is under memory pressure, otherwise they stay in the operating memory. Using swap backing is generally preferred instead of using malloc backing.

null

Bitsink; all writes do nothing, all reads return zeroes.

-f file

Filename to use for the vnode type memory disk. The -a and -t vnode options are implied if not specified.

-l

List configured devices. If given with -u, display details about that particular device. If given with -f file, display md(4) device names of which file is used as the backing store. If both of -u and -f options are specified, display devices which match the two conditions. If the -v option is specified, show all details.

-n

When printing md(4) device names, print only the unit number without the md(4) prefix.

-s size

Size of the memory disk. Size is the number of 512 byte sectors unless suffixed with a b, k, m, g, t, or p which denotes byte, kilobyte, megabyte, gigabyte, terabyte and petabyte respectively. When used without the -r option, the -a and -t swap options are implied if not specified.

-S sectorsize

Sectorsize to use for the memory disk, in bytes.

-x sectors/track

See the description of the -y option below.

-y heads/cylinder

For malloc or vnode backed devices, the -x and -y options can be used to specify a synthetic geometry. This is useful for constructing bootable images for later download to other devices.

-L label

Associate a label (arbitrary string) with the new memory disk. The label can then be inspected with

mdconfig -l -v

-o [no]option

Set or reset options.

[no]async

For vnode backed devices: avoid IO_SYNC for increased performance but at the risk of deadlocking the entire kernel.

[no]reserve

Allocate and reserve all needed storage from the start, rather than as needed.

[no]cluster

Enable clustering on this disk.

[no]compress

Enable/disable compression features to reduce memory usage.

[no]force

Disable/enable extra sanity checks to prevent the user from doing something that might adversely affect the system. This can be used with the -d flag to forcibly destroy an md(4) disk that is still in use.

[no]readonly

Enable/disable readonly mode.

[no]verify

For vnode backed devices: enable/disable requesting verification of the file used for backing store. The type of verification depends on which security features are available. One example of verification is testing file integrity with checksums or cryptographic signatures.

-u unit

Request a specific unit number or device name for the md(4) device instead of automatic allocation. If a device name is specified, it must start with “md” followed by the unit number.

The last form, mdconfig file, is provided for convenience as an abbreviation of mdconfig -a -t vnode -f file.

EXAMPLES

Create a disk with /tmp/boot.flp as backing storage. The name of the allocated unit will be printed on stdout, such as “md0”:

mdconfig /tmp/boot.flp

Create a 1 gigabyte swap backed memory disk named “md3”:

mdconfig -s 1g -u md3

Detach and free all resources used by /dev/md3:

mdconfig -du md3

Show detailed information on current memory disks:

mdconfig -lv

Resize the “md3” memory disk to 2 gigabytes:

mdconfig -rs 2g -u md3

Create a 1 gigabyte swap backed disk, initialize an ffs(7) file system on it, and mount it on /tmp:

mdconfig -s 1g -u md10
newfs -U /dev/md10
mount /dev/md10 /tmp
chmod 1777 /tmp

Create a memory disk out of an ISO 9660 CD image file, using the first available md(4) device, and then mount it:

mount -t cd9660 /dev/`mdconfig -f cdimage.iso` /mnt

Create a file-backed device from a hard disk image that begins with 512K of raw header information. gnop(8) is used to skip over the header information, positioning md1.nop to the start of the filesystem in the image.

mdconfig -u md1 -f diskimage.img
gnop create -o 512K md1
mount /dev/md1.nop /mnt

SEE ALSO

open(2), md(4), ffs(7), gpart(8), mdmfs(8), malloc(9)

HISTORY

The mdconfig utility first appeared in FreeBSD 5.0 as a cleaner replacement for the vn kernel module and the vnconfig utility combo.

AUTHORS

The mdconfig utility was written by Poul-Henning Kamp <phk@FreeBSD.org>.